Loading the Design
After editing the final design, the design file is loaded into the embroidery machine. Different machines expect different files formats. The most common home design format is PES. Common design file formats for the home and hobby market include: ART, PES, VIP, JEF, SEW, and HUS. Embroidery patterns can be transferred to the computerized embroidery machines in a variety of ways, either through cables, CDs, floppy disks, USB interfaces, or special cards that resemble flash and compact cards.
Stabilizing the Fabric
To prevent wrinkles and other problems, the fabric must be stabilized. The method of stabilizing depends to a large degree on the type of machine, the fabric type, and the design density. For example, knits and large designs typically require firm stabilization. There are many methods for stabilizing fabric, but most often one or more additional pieces of material called "stabilizers" or "interfacing" are added beneath and/or on top of the fabric. Many types of stabilizers exist, including cut-away, tear-away, vinyl, nylon, water-soluble, heat-n-gone, adhesive, open mesh, and combinations of these.
For smaller embroidered items, the item to be embroidered is hooped, and the hoop is attached to the machine. There is a mechanism on the machine (usually called an arm) that then moves the hoop under the needle.
For large commercially embroidered items, a bolt of fabric can be worked by a long row of embroidery "heads", producing a continuous pattern of embroidery. Each embroidery head is a sewing machine with multiple needles for different colors, and is usually capable of producing many special fabric effects including satin-stitch embroidery, chain-stitch embroidery, sequins, appliqué, cutwork, and other effects.
Embroidering the Design
Finally, the embroidery machine is started and monitored. For commercial machines, this process is a lot more automated than for the home embroiderer. For most designs, there is more than one color, and often additional processing for appliqués, foam, and other special effects. Since home machines only have one needle, every color change requires the user to cut the thread and change the color manually. In addition, most designs will have a few or many jumps that need to be cut. Depending on the quality and size of the design, stitching out a design file can require a few minutes or an hour or more.